ODIN Works 7.62 Atlas Compensator
Timing and tuning a compensator can be tedious, but the ODIN Works 7.62 Atlas Compensator makes quick work of both installation and tuning. The modular design means that only the sleeve and the cap need to be timed, no shims, no crush washer, no fussing. Furthermore, the sleeve is Titanium, reducing weight without sacrificing strength and durability. The core and the cap are both made of 416R stainless steel for toughness and longevity. They also feature a Black Nitride finish for protection, and their looks work quite well with the Titanium sleeve, giving the set an attractive 2-Tone finish.
This variant is designed for 7.62 (30 cal) projectiles and features 5/8-24 threads.
NOTE: 416R is a Crucible-brand steel formulated specifically for barrels. Most types of steel, including standard 416SS, are not designed for use in freezing temperatures. But this steel was designed to operate in arctic temperatures, up to -40F. 416R also has greater accuracy potential than normal 416SS and 4150 steel due to its ability to take highly defined rifling and machining cuts.
NOTE: Be SURE to check your AR Barrel threads when you are installing a new comp. It is very easy to cross-thread and/or install the wrong compensator, so always double-check and be very sure of what you are installing.
Specifications
-
   For 7.62 (30 cal) 5/8×24 threading
-
   Length: 3.06″
-
   Weight: 4.39 oz
| Weight | 4.384 oz |
|---|---|
| Muzzle Device Type | Compensator |
| Threads | 5/8×24 |
| Cartridge Compatibility | .30 (7.62/.308) |
| Finish | Stainless |
| MPN | MB- ATLAS-7 |
| UPC | 856205005889 |
Compliance
NFA (National Firearms Act) compliance is crucial for legal ownership and transfer of regulated firearms and accessories like short-barreled rifles, suppressors, and certain types of ammunition, ensuring adherence to federal regulations to avoid legal penalties and ensure responsible firearm ownership.